Pentair AK110 - Communications; Pager Setup Screens

36
ACU-TROL
®
AK110 Chemical Controller Installation and User's Guide
The followings are only available if the modem is purchased and installed.
Modem: Sets up the number of rings to answer on and the long hang up time. If you enter the password 9000 you can
access the modem diagnostic screen. On the modem diagnostic screen you will see the modem initialization string that
was returned by the modem during startup. This string should end with the word “OK” for working modems.
Pager Test: Tests pagers and displays paging status. To test the pagers, simply Press ENTER while in this screen. The
screen displays which pager is being paged and its counting down time. If the paged modem (pager company) is not
answering,theControllermodemwillhangupwithin40seconds,andthemodemisreset,readyforthenextpage.You
can press the BACK button at any time to cancel the testing process.
Pager Numbers: Sets up the pager numbers. The programming setup screen will display up to four pager numbers.
This will allow the system to page up to four numbers to alert more than one technician when a pool problem arises.
The process to enter pager numbers in the AK110 is as follows:
1. Press BACK button to reach MAIN Screen.
2. Scroll down to Communications
3. Press ENTER to select Communications
4. Scroll down to pager numbers and press ENTER to select pager numbers
5. Select the #1 pager number location.
6.Usingthekeypadtoenterpagernumber.Usingcursorarrowstomovetothenextnumberandsoon.(Thekeypad
worksexactlylikeacellphonekeypadandenteringinformationasyouwouldaphonenumberinyourcellphone
address book). See AK110 Programming Screen Navigation on page 88 for details on alarms. Make sure to enter the
"comma" to allow enough delay time for the modem on the other end to pick up. Each comma is worth 4 seconds
of time. Use the 0 button to toggle the ',', '-', and '#' for pager editing. Press ENTER to save the changes. Here is an
exampleforapagernumberentry:18005552222,,9014910,,911#.Theactualpagernumberisyourphonenumber.You
determineacode(example:911forchemicaloverfeed)dependingonwhatyouwantthepagertodeneasaproblem.
Thestringalwaysendswitha‘#’sign.IfamistakeismadepressUPtodelete.PressDOWNtoabortentry.SeeAK110
Programming Screen Navigatioin, Pager 1 and 2 for details on page 102.
Pager Setup Screens
Communications