96
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s
Alarm Out -OFF
69.0f SW1OFFSW2OFF
Main Status Screen
Name:Main Pool
System
>Programming
Service
Data ( 8:441 )
Communications
Security Setup
Wizards
Serial # 123456
Configuration Menu, Programming
AK110 Programming Screen Navigation, Front Panel Alarm (1 of 2)
EnterBack
1:pH, Mix Time
2:ORP, Mix Time
3:Not Used
>A:Alarm
P:Pager1
P:Pager2
P:Pager3
P:Pager4
Programming Setup Screen
EnterBack
Alarm, On if SW1 is Off
Alarm, Not On if SW1 is Off
Enter
Enter new value
Current: 630
630
v-Cancel ^
Use the keypad to enter the low
ORP value under which the front
panel alarm indicator will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Enter
Low ORP Setpoint Screen
Enter
Alarm, High pH Setpoint
Enter new value
Current: 8.00
8.00
v-Cancel ^
Use the keypad to enter the high pH
value over which the front panel
alarm indicator will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
High pH Setpoint Screen
Alarm, High ORP Setpoint
Enter
High ORP Setpoint Screen
On if Sw1 Off-YES <
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-NO <
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630<
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when the flow
switch SW1 is off.
Enter new value
Current: 770
770
v-Cancel ^
Use the keypad to enter the high
ORP value over which the front
panel alarm indicator will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770<
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00<
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Enter
Alarm, Low pH Setpoint
Enter new value
Current: 7.00
7.00
v-Cancel ^
Use the keypad to enter the low pH
value under which the front panel
alarm indicator will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Low pH Setpoint Screen
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00<
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Enter
Alarm, Low Temperature Setpoint
Enter new value
Current: 32.0
32.0
v-Cancel ^
Use the keypad to enter the low
temperature under which the front
panel alarm indicator will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Low Temperature Setpoint Screen
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0<
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Enter
Alarm, High Temperature Setpoint
Enter new value
Current: 104.0
104.0
v-Cancel ^
Use the keypad to enter the high
temperature over which the front
panel alarm indicator will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
High Temperature Setpoint Screen
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0<
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
To Front Panel Alarm (2 of 2)
Note:
The options available on the Front
Panel Alarm Screen programming
menu may vary in accordance with
the chosen configurations for relays
1, 2 and 3.
Back
AK110 Programming Screen Navigation, Front Panel Alarm, Rev 3 22 Aug 2008
10.19
To Next Page
Loading...
