Pentair AK110 - SECTION 10 MENUS

45
ACU-TROL
®
AK110 Chemical Controller Installation and User's Guide
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s
_____
69.0f SW1OFFSW2OFF
Main Status Screen
>Name:Main Pool
System
Programming
Service
Data ( 8:441 )
Communications
Security Setup
Wizards
Serial # 123456
Configuration Menu, Controller Name
AK110 Controller Name Screen Navigation
Back
Controller Name Setup Screen
Use the AK110 keypad to enter in a
new controller name. The controller
name may consist of a maximum of
14 alphanumeric characters.
Press the down arrow key to return
to the configuration menu.
Using the AK110 Keypad to Name the Controller
1
Main Pool
U
v-Cancel Back-Ins
Enter
1
Main Pool
U
v-Cancel Back-Ins
1
Main Pool
U
v-Cancel Back-Ins
Each numeric key is associated with three
or more letters of the alphabet, or with
punctuation and other special characters.
Successive keypresses cycle through the
various characters associated with each
key. For instance, press the [5] key once
to display the number "5" on-screen.
Press it a second time (while the cursor is
in the same position) to display the letter
"J". The third keypress displays the letter
"K" and the fourth keypress displays the
letter "L". Press the key one more time to
return to the number "5".
Each of the arrow keys as well as the
[Back] and [Enter] keys perform specific
functions within the Controller Name
Screen.
Press the up arrow key to delete the
character at the cursor position.
Press the left arrow key to move the
cursor one space to the left.
Press the right arrow key to move the
cursor one space to the right.
Press the down arrow key to cancel out of
the controller naming process.
Press the [Back] key to insert a blank
space at the cursor position.
Press the [Enter] key to confirm the
controller name as displayed on-screen.
Moving the Cursor
Controller Name, Upper Case Text Controller Name, Lower Case Text
Controller Name, Cursor to Right
1
main Pool
u
v-Cancel Back-Ins
To change between upper case and lower case letters, press the left arrow key until the
cursor is in the leftmost position, then press the left arrow key once again. The letter
"U" in the lower right corner of the display indicates whether subsequent text entered
will be lower case or upper case.
1
Main Pool
U
v-Cancel Back-Ins
Controller Name, Cursor to Left
An upper case "U" in the lower right
corner of the display indicates that
letters entered in via the keypad will
be displayed in upper case.
A lower case "u" in the lower right
corner of the display indicates that
letters entered in via the keypad will
be displayed in lower case.
The cursor position is indicated by
the character "1" located directly
above the first character in the
controller name.
Press the right arrow key to move
the cursor one space to the right.
The cursor has moved one space to
the right and is now positioned
directly above the second character
in the controller name.
Press the left arrow key to return the
cursor to its previous position.
Changing between Upper and Lower Case Letters
T U V
8 9
W X Y ZP Q R S
7
G H I
4
J K L
5
M N O
6
A B C
2
D E F
3
!$%^&*+
1
,-#.@_
0
Confirm
ENTERBACK
Insert
L
E
F
T
R
I
G
H
T
DELETE
CANCEL
AK110 Controller Name Screen Navigation, Rev 3 21 Aug 2008
SECTION 10
MENUS
SCREEN NAVIGATION KEYS
For basic Controller operations, follow the screen navigation keys. The arrows guide you to each level and provide you
examplesoftheinformationbasedontheconditionofyourpool.TheactualinformationontheControllerscreenwill
differfromthemenuexamples.TheLCDback-lightturnsofffollowingauser-denedperiodofinactivity.Pressanykey
to turn the on back-light. The LCD screen displays 4 horizontal rows at a time. Many menus consist of five or more lines.
Use the up or down arrow keys to navigate through longer menus to display additional menu options on-screen.
PLEASE CALL 800-831-7133 FOR TECHNICAL ASSISTANCE.
NOTE:
The keypads on the mounted AK110 Chemical Controller do not have the letter of the alphabet
or numbers printed on the keypad.
The some models curser keys do not have "Delete", "To Right", "Cancel"
or "To Left" printed on the keys.
Press "ENTER"
at the end of each
programming
session to save the
changes. If "ENTER" is not
pressed the AK110
will default back to
the original
saved changes.