EasyManua.ls Logo

Pentair AK110 - Page 107

Pentair AK110
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
107
AK110 Programming Screen Navigation, E-mail 1 (2 of 2)
Use the keypad to enter the time
delay between the alarm trigger and
the activiation of e-mail 1.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Delay Time Screen
Enter new value
Current: 00:10:00
00:10:00
v-Cancel ^
Enter
E-mail 1, Delay Time
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00<
On Time 00:00:02
MinTimeOff 12:00:00
E-mail 1, On if SW2 is Off
Enter
E-mail 1, Not On if SW2 is Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO <
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-YES <
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Press the [Enter] key to choose
whether e-mail 1 is to be used when
switch 2 (SW2) is off.
E-mail 1, Not On if Overfeed Occurs
Enter
E-mail 1, On if Overfeed Occurs
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES<
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed NO<
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Press the [Enter] key to choose
whether e-mail 1 is to be used when
an overfeed condition occurs.
E-mail 1, On Time
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02<
MinTimeOff 12:00:00
Use the keypad to enter the amount
of time e-mail 1 is to be active once
an alarm condition occurs.
Press the [Enter] key to confirm or
the down arrow key to cancel.
On Time Screen
Enter new value
Current: 00:00:02
00:00:02
v-Cancel ^
Enter
E-mail 1, Minimum Time Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00<
Use the keypad to enter the amount
of time e-mail 1 is to be inactive
once an alarm condition is fixed.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time Off Screen
Enter new value
Current: 12:00:00
12:00:00
v-Cancel ^
Enter
From E-mail 1 (1 of 2)
Enter
E-mail 1, High Temperature Setpoint
Enter new value
Current: 104.0
104.0
v-Cancel ^
Use the keypad to enter the high
temperature value over which e-mail
1 is to be activated.
Press the [Enter] key to confirm or
the down arrow key to cancel.
High Temperature Setpoint Screen
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0<
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
E-mail 1, Off if SW1 is Off
Enter
E-mail 1, Not Off if SW1 is Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-YES <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Press the [Enter] key to choose
whether e-mail 1 is to be used when
the flow switch SW1 is off.
AK110 Programming Screen Navigation, E-mail 1, Rev 3 22 Aug 2008

Table of Contents

Related product manuals