Pentair AK110 - Page 111

111
AK110 Wizards Setup Screen Navigation (2 of 2)
Wizards Setup Screen, Pager 1
1:pH, Mix Time 2:ORP, Mix Time 3:Not Used
A:Alarm >P:Pager1 P:Pager2 P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >Pager1
Change Control Type, Pager 1
Change Control Type Press -> to toggle control type >Not Used
Change Control Type, Pager 1
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Wizards Setup Screen, Pager 2
1:pH, Mix Time 2:ORP, Mix Time 3:Not Used
A:Alarm P:Pager1 >P:Pager2 P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >Pager2
Change Control Type, Pager 2
Change Control Type Press -> to toggle control type >Not Used
Change Control Type, Pager 2
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Enter Enter
Wizards Setup Screen, Pager 3
1:pH, Mix Time 2:ORP, Mix Time 3:Not Used
A:Alarm P:Pager1 P:Pager2 >P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >Pager3
Change Control Type, Pager 3
Change Control Type Press -> to toggle control type >Not Used
Change Control Type, Pager 3
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Wizards Setup Screen, Pager 4
1:pH, Mix Time
2:ORP, Mix Time
3:Not Used
A:Alarm P:Pager1 P:Pager2 P:Pager3 >P:Pager4
Change Control Type Press -> to toggle control type >Pager4
Change Control Type, Pager 4
Change Control Type Press -> to toggle control type >Not Used
Change Control Type, Pager 4
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Enter Enter
From Wizards Setup (1 of 2)
Control Options for Pager / E-mail 1:
1. 2.
Pager1 / Email1 Not Used
Control Options for Pager / E-mail 2:
1. 2.
Pager2 / Email2 Not Used
Control Options for Pager / E-mail 3:
1. 2.
Pager3 / Email3 Not Used
Control Options for Pager / E-mail 4:
1. 2.
Pager4 / Email4 Not Used
The Wizards Setup Screen displays
four pagers when a dial-up modem (or no modem at all) is installed in the controller. If a cellular modem is installed in the controller, these four pagers are replaced with similar E-mail wizard setup menus.
Wizards Setup Screen, Email 1
1:pH, Mix Time 2:ORP, Mix Time 3:Not Used
A:Alarm >P:Email1 P:Email2 P:Email3 P:Email4
Wizards Setup Screen and the Modem
9 7
or
9 7
or
9 7
or
9 7
or
AK110 Wizards Setup Screen Navigation, Rev 3 22 Aug 2008