55
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s
_____
69.0f SW1OFFSW2OFF
Main Status Screen
>Name:Main Pool
System
Programming
Service
Data ( 8:441 )
Communications
Security Setup
Wizards
Serial # 123456
Configuration Menu, Controller Name
AK110 Controller Name Screen Navigation
Back
Controller Name Setup Screen
Use the AK110 keypad to enter in a
new controller name. The controller
name may consist of a maximum of
14 alphanumeric characters.
Press the down arrow key to return
to the configuration menu.
Using the AK110 Keypad to Name the Controller
1
Main Pool
U
v-Cancel Back-Ins
Enter
1
Main Pool
U
v-Cancel Back-Ins
1
Main Pool
U
v-Cancel Back-Ins
Each numeric key is associated with three
or more letters of the alphabet, or with
punctuation and other special characters.
Successive keypresses cycle through the
various characters associated with each
key. For instance, press the [5] key once
to display the number "5" on-screen.
Press it a second time (while the cursor is
in the same position) to display the letter
"J". The third keypress displays the letter
"K" and the fourth keypress displays the
letter "L". Press the key one more time to
return to the number "5".
Each of the arrow keys as well as the
[Back] and [Enter] keys perform specific
functions within the Controller Name
Screen.
Press the up arrow key to delete the
character at the cursor position.
Press the left arrow key to move the
cursor one space to the left.
Press the right arrow key to move the
cursor one space to the right.
Press the down arrow key to cancel out of
the controller naming process.
Press the [Back] key to insert a blank
space at the cursor position.
Press the [Enter] key to confirm the
controller name as displayed on-screen.
Moving the Cursor
Controller Name, Upper Case Text Controller Name, Lower Case Text
Controller Name, Cursor to Right
1
main Pool
u
v-Cancel Back-Ins
To change between upper case and lower case letters, press the left arrow key until the
cursor is in the leftmost position, then press the left arrow key once again. The letter
"U" in the lower right corner of the display indicates whether subsequent text entered
will be lower case or upper case.
1
Main Pool
U
v-Cancel Back-Ins
Controller Name, Cursor to Left
An upper case "U" in the lower right
corner of the display indicates that
letters entered in via the keypad will
be displayed in upper case.
A lower case "u" in the lower right
corner of the display indicates that
letters entered in via the keypad will
be displayed in lower case.
The cursor position is indicated by
the character "1" located directly
above the first character in the
controller name.
Press the right arrow key to move
the cursor one space to the right.
The cursor has moved one space to
the right and is now positioned
directly above the second character
in the controller name.
Press the left arrow key to return the
cursor to its previous position.
Changing between Upper and Lower Case Letters
T U V
8 9
W X Y ZP Q R S
7
G H I
4
J K L
5
M N O
6
A B C
2
D E F
3
!$%^&*+
1
,-#.@_
0
Confirm
ENTERBACK
Insert
L
E
F
T
R
I
G
H
T
DELETE
CANCEL
AK110 Controller Name Screen Navigation, Rev 3 21 Aug 2008
To Next Page
Loading...
