Pentair AK110 - Page 57

57
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF
Main Status Screen
>Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Name:Main Pool >System Programming
Service Data ( 8:441 ) Communications Security Setup Wizards Serial # 123456
Configuration Menu, System System Setup Screen, Time
System Setup Screen, Friday
System Setup Screen, On Delay 15s System Setup Screen, Backlight 60s System Setup Screen, Temp Display On
AK110 System Setup Screen Navigation
Time: 12:34:56 Date: 07/04/08 >Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl >On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 >Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 >Temp Display: ON Reset to Defaults Normal Alarms
System Setup Screen, Temp Display Off
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 >Temp Display: OFF Reset to Defaults Normal Alarms
Enter
System Setup Screen, On Delay 30s
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Br >On Delay 30 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Enter
Enter
System Setup Screen, Backlight 120s
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 >Backlight T 120 Temp Display: ON Reset to Defaults Normal Alarms
Enter
System Setup Screen, Saturday
Time: 12:34:56 Date: 07/04/08 >Day : Saturday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Enter
Enter new value Current: 12:34:56 12:34:56 v-Cancel ^
Time Setup Screen
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON >Reset to Defaults Normal Alarms
System Setup Screen, Reset to Defaults
-Confirm Changes -Reset to Defaults NO:7 9:YES
Reset to Defaults Confirmation Screen
EnterBack
Enter
9 7 or
Press the [Enter] key to cycle through the days of the week.
Press the [Enter] key to set the time the LCD backlight remains on following the last keypress event. Press the [Enter] key to set the post power-up control relay delay time from 15s to 255s, in 15s increments. Press the [Enter] key to turn the Main Status Screen temperature display on and off.
Press the [9] key to reset the system settings to the factory default condition or the [7] key to cancel.
Use the keypad to enter the time. The AK110 uses a 24-hour clock. Press the [Enter] key to confirm or the down arrow key to cancel.
System Setup Screen, English Units
Time: 12:34:56 Date: 07/04/08 Day : Friday
>Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
System Setup Screen, Metric Units
Time: 12:34:56 Date: 07/04/08 Day : Friday
>Units: METRIC Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Enter
Press the [Enter] key to switch between English and Metric units of measurment.
System Setup Screen, Chlorine
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 >Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
System Setup Screen, Bromine
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 >Sanitizer: Br On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Enter
Press the [Enter] key to switch between Chlorine and Bromine sanitizer.
Back
Enter
Time: 12:34:56 >Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
System Setup Screen, Date
Enter new value Current: 07/04/08 07/04/08 v-Cancel ^
Date Setup Screen The Date and Day of Week parameters are enabled only if the optional 90505C Real Time Clock module has been installed. Use the keypad to enter the date. Press the [Enter] key to confirm or the down arrow key to cancel.
System Setup Screen, 2 Hour Intervals
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH >
Data Interval: 2
Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
System Setup Screen, Hourly Intervals
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH >
Data Interval: 1
Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults Normal Alarms
Enter
Press the [Enter] key to record information in the data log every two hours or every hour.
System Setup Screen, Normal Alarms
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60 Temp Display: ON Reset to Defaults >
Normal Alarms
System Setup Screen, Percentage Alarms
Time: 12:34:56 Date: 07/04/08 Day : Friday
Units: ENGLISH Data Interval: 2 Sanitizer: Cl On Delay 15 Backlight T 60
Temp Display: OFF
Reset to Defaults >
Alarm Percentages
Enter
Press the [Enter] key to switch between normal alarms (greater than & less than) or percentage alarms (percentage about the setpoint).
AK110 System Setup Screen Navigation, Rev 3 21 Aug 2008