89
AK110 Programming Screen Navigation, Alarm Out (2 of 2)
Use the keypad to enter the time
delay between the alarm trigger and
turning on of the alarm out relay.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Delay Time Screen
Enter new value
Current: 00:10:00
00:10:00
v-Cancel ^
Enter
Alarm Out, Delay Time
From Alarm Out (1 of 2)
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00<
MinTime On 00:00:10
MinTimeOff 00:00:10
Alarm Out, On if SW2 is Off
Enter
Alarm Out, Not On if SW2 is Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO <
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-YES <
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the alarm out relay is turned
on when switch 2 (SW2) is off.
Alarm Out, Not On if Overfeed Occurs
Enter
Alarm Out, On if Overfeed Occurs
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES<
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed NO<
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the alarm out relay is turned
on when an overfeed condition
occurs.
Alarm Out, Minimum Time On
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10<
MinTimeOff 00:00:10
Use the keypad to enter the amount
of time the alarm out will be held on
once an alarm condition occurs.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time On Screen
Enter new value
Current: 00:00:10
00:00:10
v-Cancel ^
Enter
Alarm Out, Minimum Time Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10<
Use the keypad to enter the amount
of time the alarm out will be held
off once an alarm condition is fixed.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time Off Screen
Enter new value
Current: 00:00:10
00:00:10
v-Cancel ^
Enter
Enter
Alarm Out, High Temperature Setpoint
Enter new value
Current: 104.0
104.0
v-Cancel ^
Use the keypad to enter the high
temperature value over which the
alarm out relay will turn on.
Press the [Enter] key to confirm or
the down arrow key to cancel.
High Temperature Setpoint Screen
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0<
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Alarm Out, Off if SW1 is Off
Enter
Alarm Out, Not Off if SW1 is Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-YES <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the alarm out relay is turned
off when the flow switch SW1 is
off.
AK110 Programming Screen Navigation, Alarm Out, Rev 3 22 Aug 2008
To Next Page
Loading...
