EasyManua.ls Logo

Pentair AK110 - Page 99

Pentair AK110
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
99
AK110 Programming Screen Navigation, Front Panel Alarm (2 of 2)
Use the keypad to enter the time
delay between the alarm trigger and
turning on of the front panel alarm.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Delay Time Screen
Enter new value
Current: 00:10:00
00:10:00
v-Cancel ^
Enter
Alarm, Delay Time
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00<
MinTime On 00:00:10
MinTimeOff 00:00:10
Alarm, On if SW2 is Off
Enter
Alarm, Not On if SW2 is Off
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO <
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-YES <
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when switch 2
(SW2) is off.
Alarm, Not On if Overfeed Occurs
Enter
Alarm, On if Overfeed Occurs
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES<
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed NO<
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when an
overfeed condition occurs.
Alarm, Minimum Time Off
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10<
Use the keypad to enter the amount
of time the alarm will be held off
once an alarm condition is fixed.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time Off Screen
Enter new value
Current: 00:00:10
00:00:10
v-Cancel ^
Enter
From Front Panel Alarm (1 of 2)
Alarm, Minimum Time On
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10<
MinTimeOff 00:00:10
Use the keypad to enter the amount
of time the front panel will be held
on once an alarm condition occurs.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time On Screen
Enter new value
Current: 00:00:10
00:00:10
v-Cancel ^
Enter
Alarm, Off if SW1 is Off
Enter
Alarm, Not Off if SW1 is Off
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO <
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-YES <
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned off when the flow
switch SW1 is off.
Alarm, On if SW2 is On
Enter
Alarm, Not On if SW2 is On
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –YES <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when switch 2
(SW2) is on.
AK110 Programming Screen Navigation, Front Panel Alarm, Rev 3 22 Aug 2008
AK110 Programming Screen Navigation, Front Panel Alarm (2 of 2)
Use the keypad to enter the time
delay between the alarm trigger and
turning on of the front panel alarm.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Delay Time Screen
Enter new value
Current: 00:10:00
00:10:00
v-Cancel ^
Enter
Alarm, Delay Time
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00<
MinTime On 00:00:10
MinTimeOff 00:00:10
Alarm, On if SW2 is Off
Enter
Alarm, Not On if SW2 is Off
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO <
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-YES <
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when switch 2
(SW2) is off.
Alarm, Not On if Overfeed Occurs
Enter
Alarm, On if Overfeed Occurs
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES<
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed NO<
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when an
overfeed condition occurs.
Alarm, Minimum Time Off
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10<
Use the keypad to enter the amount
of time the alarm will be held off
once an alarm condition is fixed.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time Off Screen
Enter new value
Current: 00:00:10
00:00:10
v-Cancel ^
Enter
From Front Panel Alarm (1 of 2)
Alarm, Minimum Time On
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10<
MinTimeOff 00:00:10
Use the keypad to enter the amount
of time the front panel will be held
on once an alarm condition occurs.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time On Screen
Enter new value
Current: 00:00:10
00:00:10
v-Cancel ^
Enter
Alarm, Off if SW1 is Off
Enter
Alarm, Not Off if SW1 is Off
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO <
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-YES <
On if Sw2 On –NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned off when the flow
switch SW1 is off.
Alarm, On if SW2 is On
Enter
Alarm, Not On if SW2 is On
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –NO <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 On –YES <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
MinTime On 00:00:10
MinTimeOff 00:00:10
Press the [Enter] key to choose
whether the front panel alarm
indicator is turned on when switch 2
(SW2) is on.
AK110 Programming Screen Navigation, Front Panel Alarm, Rev 3 22 Aug 2008

Table of Contents

Related product manuals