Pentax ist D User Manual

76180 EM -64/73-
***** MAIN MENU *****
*This adjustment only for the body with 1
st
FW →
***** SELECT AE TYPE *****
TYPE 1 ( LV6,8,10,12,16 ) ---- [ 1 ]
TYPE 2 ( LV6,9,12,15 ) ---- [ 2 ]
[ 2 ] EXPOSURE ADJUSTMENTS
***** 76180 < A GROUP > *****
BV ADJUSTMENTS ---> [ 1 ]
TTL FLASH QUENCH SIGNAL ADJUSTMENT ---> [ 2 ]
LED ADJUSTMENT FOR J100 ---> [ 3 ]
MAIN MENU ---> [ 4 ]
***** LED ADJUSTMENT FOR J100 *****
ATTACH BODY MOUNT CAP (BLACK) ONTO CAMERA.
ATTACH AN EYE PIECE COVER.
SET BUILT-IN FLASH TO POP-UP POSIION.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
KEEP TURNING ON METERING SW OF CAMERA.
SET LIGHT SOURCE TO LV 16 (or 15).
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** BV ADJUSTMENTS *****
MOUNT F-8 SET RING ONTO CAMERA.
ATTACH LIGHT MEASURING MASTER LENS
FOR LX WITH WIDE OPENED POSITION.
KEEP TURNING ON METERING SW OF CAMERA.
SET LIGHT SOURCE TO LV 6.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
BV ADJUSTMENTS HAVE BEEN COMPLETED.
BV ADJUSTMENTS AGAIN ---> [ 1 ]
NEXT OF TTL FLASH QUENCH SIGNAL ADJUSTMENT---> [ 2 ]
A GROUP MENU ---> [ 3 ]
***** TTL QUENCH SIGNAL ADJUSTMENT *****
MOUNT F-8 SET RING ONTO CAMERA.
ATTACH LIGHT MEASURING MASTER LENS
FOR LX WITH CLOSED F8 POSITION.
SET LIGHT SOURCE TO LV 8 (or 9).
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
TTL QUENCH SIGNAL ADJUSTMENT HAS BEEN COMPLETED.
TTL QUENCH SIGNAL ADJUSTMENT AGAIN ---> [ 1 ]
LED ADJUSTMENT FOR J100 ---> [ 2 ]
A GROUP MENU ---> [ 3 ]
B GROUP MENU ---> [ 4 ]

Pentax ist D Specifications

General

Brand	Pentax
Model	ist D
Category	Digital Camera
Language	English