Peri CB 160 - Anchoring to the Building Structure

2 Instructions for Assembly and Use – Standard Configuration
CB 160 Climbing Formwork
Introduction
Anchoring to the building structure
Variant 1
5.4 Threaded Anchor Plate DW 15*
5.5 Tie Rod DW 15*, Z-12.4-70
L
1
= h – 8 cm
or Tie Rod B15*, Z-12.5-82
5.3 Climbing Cone 2 M24/DW 15
5.6 Scaffold Mounting Ring M24, galv.
5.7 Hex. Bolt
M24 x 120 ISO 4014-10.9
5.8 Spacer Tube DR 22* (optional)
L
2
= h – 18.5 cm (tolerance 0 to
+5 mm)
Anchoring depth h = variable,
min. 18.5 cm
* Not re-usable
With PVC spacer tube, the tie rod (5.5)
is reusable.
Variant 2
5.2 Threaded Anchor Plate DW 20*
5.1 Screw-On Cone 2 M24/DW 20
5.6 Scaffold Mounting Ring M24, galv.
5.7 Hex. Bolt M24 x 120
ISO 4014-10.9
Anchoring depth h = 15.5 cm.
* Not re-usable
L
1
L
2
5.2 5.1 5.75.6
5.4 5.5 5.65.3 5.7
h = 15.5 cm
Ø 10 cm
h ≥ 18.5 cm
Ø 8 cm
Overview,
Main Components
5.8