49
49
Pre-Defined Standing Sequences
Pre-Defined 2: Tight “Sit to Stand”
This sequence is similar to the Default 1, except the backrest and legrest angles are more “contracted”.
This results in a faster transition to standing, where the backrest angle opens less while the seat
pan angle increases.
Start
Stand=0
Leg=100
Back=115
Stand=45
Leg=100
Back=115
Stand=65
Leg=100
Back=112
Finish
Stand=85
Leg=95
Back=95
Start
Stand=85
Leg=95
Back=95
Stand=65
Leg=100
Back=112
Stand=45
Leg=100
Back=115
Stand=0
Leg=100
Back=115
The “down” sequence finishes with the user in a nearly upright seated position.
Programming VS - Specific Attributes
To Next Page
Loading...