Need help?Do you have a question about the Permobil ICS and is the answer not in the manual?
General| Brand | Permobil |
|---|---|
| Model | ICS |
| Category | Control Systems |
| Language | English |
Explains LED states (Off, Solid, Flashing) and colors (Green, Yellow, Red).
Details meanings of LED colors (Green, Yellow, Red) and states (Solid, Flashing).
Explains controlling seat functions using the switchbox and interpreting LED feedback.
Details seat function memory overview and switchbox button functions.
Explains how seat positions can be stored and recalled using memory functions.
Step-by-step guide on storing a seating position into memory using the switchbox.
Step-by-step guide on recalling a stored seating position from memory.
Explains using the joystick and MODE button to select and operate seat functions.
Details recalling and storing seat positions using the R-net control panel.
Step-by-step guide on storing a seating position into memory using the R-net panel.
Explains the VS seating system's capability for standing and its operation.
Details how to operate the standing sequence using the ICS switchbox with different layouts.
Explains how to operate the standing function using the Pilot+ joystick.
Details programming steps performed using the ICS switchbox itself.
Explains configuring ICS settings using the R-net control panel's OBP function.
Details global settings configurable via the ICS switchbox.
Explains how to set the user's weight for safe and reliable configuration.
Explains how to select and program switchbox layouts to suit user needs.
Covers specific settings for Corpus II seating systems.
Configures legrest angle to limit wheelchair speed near front casters.
Procedure for calibrating the 45° tilt function on specific Corpus models.
Covers specific attributes for Corpus 3G, HD, APE, and VS seating systems.
Explains the IRM function for regaining optimal seated position.
Details key sequences for activating, deactivating, and enabling IRM.
Guides on setting maximum rear and front end positions for IRM.
Describes IRM operation via ICS control panel or R-net control panel/OMNI.
Procedure to set seat depth for proper legrest positioning and speed reduction.
Details adjustments to legrest angle for full-speed driving with front casters.
Fine-tunes legrest angle offset for speed reduction based on user's lower leg length.
Covers specific adjustments for VS and APE models.
Details setup for standing sequences and ground clearance adjustments.
Procedure for adjusting Standing Sequence 1 for VS and APE models.
To Next Page