PhaseOne XT User Manual

20IQ4 NavigationXT Camera System Manual |
Status Menu
If an icon is greyed out instead of being white it means that it (like the SD
card) is not currently present or active.
If you tap on one of the icons in the Status Menu, it will take you to the
relevant setting in the IQ4 Menu. The following is a list of the 8 dierent points
of information in the Status Menu and where they will take you in the IQ4
Menu System, if you tap on them:
• Battery Status -> Power Management
• Capture Readiness -> About
• USB-C Connection > Storage Setup
• Ethernet Connection > Network Settings
• XQD card presence > Storage Setup
• SD card presence > Storage Setup
• WiFi Connection > Network Settings
• Sensor Temperature -> Temperature
Swipe up from the bottom of the screen to close the Status Menu.
Camera Controls
The default start screen is the Camera Controls where you can adjust
exposure settings and capture the image. Please see the Camera Controls
chapter on how to use it.
Viewing Images
When you want to review the captured images, select either Viewer or
Browser by pressing the top-left button on the IQ4 until it is highlighted or by
swiping up from the bottom of the screen and select the desired mode.
Once in Viewer, you can browse through the captured images in full screen
mode by swiping on the touch screen with one finger in either direction. You
can also use pinch gestures to zoom in and out.
Please see the next chapter for all the information about viewing, deleting and
rating images as well as enabling workflow features like Highlight and Clip
Warning, adding a Grid overlay or showing file information.
Live View
You initiate Live View by either tapping on the Movie icon in Camera Controls
or by pressing the top-left button on the IQ4 until the Live View icon is
highlighted. You can also swipe up from the bottom of the IQ4 touch screen
and selecting the icon.
Please see the Live View chapter for full information about the available
features and Tools in this mode.
Viewer
Live View icon
Camera Controls
Status Menu

PhaseOne XT Specifications

General

Video Recording	No
ISO Sensitivity	100-12800
Shutter Speed	1/4000 to 60 minutes
Connectivity	Wi-Fi
Image File Format	RAW