PhaseOne XT - Security and HDMI Output; IQ4 Security Settings

67Security Settings 67XT Camera System Manual |
Security Settings
The security code protection on the IQ4 is a safety measure to ensure that
other people cannot gain access to the back without your consent. You can
change the code as well as the level of protection by selecting Menu >
Security Settings on the IQ4.
Changing Security Level
The IQ4 let you choose between four dierent security levels to suit your
workflow the best. You select them by going to Menu > Security Settings >
Security Level.
1. No Lock. This will disable the security code protection and is a convenient
option when you are the only one with access to the IQ4.
2. Lock Basic. This option will ensure that nobody can update the firmware
or restore the IQ4 settings to default without entering the security code.
Those two options will be greyed out in the IQ4 menu system, but
everything else will be available.
3. Lock UI. When you choose this option, you put the IQ4 into a capture-
only mode. The user interface is locked (both the touch screen and the
buttons), but it is still possible to capture images with the XT Camera or
by tethering. Lock UI is useful when you want to lock all settings in a busy
working enviroment or let another person shoot with the IQ4.
4. Lock System. This will lock the entire system, so that you will not be able
to even capture an image without entering the security code first. This will
also ensure that nobody can get access to the IQ4 by a tethering
connection.
Note: You might need to select Security Settings > Enter Security Code and
enter the security code to be able to change the Security Level.
Locking the IQ4
You can lock the IQ4 by swiping up from the bottom of the screen and
tapping on the Lock icon.
You can also do this by selecting IQ4 Menu > Security Settings > Lock. Note
that this feature requires that you have set the Security Level to Lock UI or
Lock System. Once you have done this, the Lock option will ensure that you –
or other people – have to enter the security code to gain access to the IQ4.