78Backup System SetupXT Camera System Manual |
System Setup has been saved to the XQD card
Loading the System Setup from a XQD card
You can choose to keep certain
settings during a Restore to Default
You can easily make a backup of the System Setup to the memory card. This
backup will include all of your settings on the IQ4. The feature makes it easy to
quickly load your preferred settings if you frequently share the XT Camera
System with other photographers. It is also a convenient way to quickly be
able to reuse all of your settings if you often rent an XT Camera System.
The backup file is stored at the root of the memory card. From there, it can be
copied to your computer for further backup or sharing. Note that the file will
get erased if you format the memory card.
Save System Setup to XQD or SD Card
The backup of the System Setup is done from the IQ4. Select IQ4 Menu >
System Settings > Save/Restore System Setup, then select either XQD or SD,
and finally Save Setup to XQD (or SD) and press the check mark to accept.
The system will now confirm that the System Setup has been saved to the
XQD (or SD) card.
Load System Setup from XQD or Sd Card
To load your saved System Setup, select IQ4 Menu > System Settings > Save/
Restore System Setup, then select either XQD or SD, and finally Restore Setup
From XQD (or SD) and press the check mark to accept. You will need to turn
the system o and back on before all the changes are applied. If there is no
valid backup file present on the XQD card, you will get a warning.
Restore to Default
You can easily restore all of the settings to the default values. This is done
from the IQ4 Menu, selecting System Settings > Restore to Default. As a
convenient feature, you have the option to choose whether Custom White
Balance values and Network Setup should be reset or kept during the restore.
Select only those you want to reset to default values, and press the check
mark to accept. This feature makes sure that you do not have to reenter some
common settings each time you need to restore the system to default settings.
Backup System Setup