32Viewing ImagesXT Camera System Manual |
Viewing Images
Viewing single Images
When you want to review the captured images, shift to Viewer by either
pressing the top-left button on the IQ4 until it is highlighted or by swiping up
from the bottom of the screen and select it.
Once in Viewer, you can browse through the captured images in full screen
mode by swiping on the touch screen with one finger in either direction.
You can also use pinch gestures to zoom; zoom in to the image when pinching
outward and zoom back out when pinching inward. Double-tap on the image
is another way to zoom in and out of the image, going from fit screen to 100%,
and back again.
While zoomed in on an image, you can pan around it by pressing a finger on
the image and moving it.
You can swipe in from either the left or right of the touch screen to enable
tools like a histogram or functionality like rating the current image.
Delete a single image
With the image selected, swipe in from the left of the screen and press on the
Rate/Delete icon to toggle the functionality on. A row under the image will
now appear where you can delete the image by tapping on the Trash icon.
If you want to delete multiple images, please see later on how to do this from
Browser.
Rating an image
With the image selected, swipe in from the left of the screen and press on the
Rate/Delete icon to toggle the functionality on. A row under the image will
now appear where you can rate the image by either tapping on the row or by
swiping your finger along it.
Displaying a Histogram
You can display a histogram in the Viewer to check for proper exposure.
Enable it by swiping in from the right of the touch screen and tap on the
histogram icon. Tap on it again to disable the histogram.
Note: The Viewer has an alternative mode similar to that on the IQ3 where
certain tools are always displayed to the right of the image. Please see the
Tools Viewer chapter for full information about the available Tools in this
mode.
To Next Page
Loading...
Need help?
General
