36Tools ViewerXT Camera System Manual |
Tools Viewer
In addition to the Viewer, which is optimized to view the images as large as
possible on the IQ4 touch screen, the IQ4 also have a Tools Viewer mode. This
mode will provide you with the ability to view certain information — like a
histogram or file metadata — side by side with the selected image. The Tools
Viewer will also let you use certain Tools or information full screen, perfect for
situations when you for example need to inspect a histogram in detail on the
IQ4 screen.
Using the Tools Viewer
You activate the Tools Viewer by either pressing the top-left button on the IQ4
until the Tools Viewer icon is highlighted or by swiping up from the bottom of
the screen and select the icon.
You can enlarge any of the information tools in column on the right side of the
Tools Viewer by tapping on its thumbnail. Tap on the thumbnail again to close
it and view the image instead.
There are three sections with tools on the right of the image.
Note that while in the Tools Viewer mode, you can still browse through the
images by swiping with your finger either left or right on the image.
To Next Page
Loading...
Need help?
General
