9Readying the camera system 9XT Camera System Manual |
Loading and removing the batteries
Loading the battery in the IQ4
1. Open the battery cover located on the underside of the IQ4 .
2. Insert the battery, power contacts first.
3. Push the battery up until it locks into position.
4. Close the compartment cover.
Removing a battery from the IQ4
1. Open the battery compartment cover.
2. Push the retaining catch inside the compartment to release the battery
and pull out.
3. Close the battery compartment cover.
Battery life
The actual number of shots possible will vary depending on the shooting
conditions. For instance Image Browsing, Live View and WiFi use will reduce
the number of shots available on a single charge. The age and condition of the
battery also has an eect on battery life.
Readying the XT
Camera System
To Next Page
Loading...
Need help?
General
