81System Maintenance 81XT Camera System Manual |
Updating the XT IQ4 System Firmware
How to update the XT Camera System Firmware
To install a Feature Update, simply download it from the Phase One website
and copy the camera package file (with the file extension .fwp) to the root
folder of a XQD card.
1. Place the IQ4 on the XT Camera Body.
2. Make sure your installed battery is fully charged on the IQ4.
3. Insert the XQD card into the IQ4.
4. On IQ4 select Menu > System Settings > Firmware > Update Firmware.
5. The XT IQ4 Camera System will now update with all relevant firmware
updates.
Please do not interrupt the updating process. Should this happen by mistake,
the update will fail and you will have to run the update again.
Updating Firmware from the IQ4
To Next Page
Loading...
