33Viewing Images 33XT Camera System Manual |
Image Info
You also have the option to display dierent kinds of metadata information
like rating, file name, and Exif data. Swipe in from the right of the touch screen
and tap on the second icon to enable it.
Exposure Masks
You can display dierent kind of masks on the images to ensure that exposure
is correct. This is done by swiping in from the right of the touch screen and
tapping on the icon with the exclamation mark. Tap on it again to remove the
information.
It is possible to toggle the dierent kind of masks on or o by long-pressing
on the icon until the Configure Masks menu becomes available.
Then choose the Show Highlights, Show Shadows and Show Clipping as
desired. Note that the Show Clipping option is based on the RAW data in the
image file. This is a great feature as any clipping warning on an image will alert
you that the highlight information is gone and cannot be recovered.
You can also adjust the threshold of Highlight (red color) and Shadow (blue
color) warnings by selecting Thresholds…
Then move either the Highlight Threshold or the Shadow Threshold slider
until they reach the desired level.
Close the menu by tapping on the arrow in the top-left corner.
Exposure Zone
This tool displays a visualization of the exposure range of the captured image
based on the raw luminosity data and is useful in determining the absolute
point at which highlights will clip. It can also be a valuable tool when deciding
how shadows are to be rendered. Color tones are used to indicate the
exposure range in either EV steps or Luminosity values.
To enable the Exposure Zone tool, swipe in from the right of the screen and
long press on the Exposure warning icon (the exclamation sign). Then select
Mode in the menu and change from Masks to Zone System.
While in the menu, you can customize the appearance of the Exposure Zone
tool by selecting Configure Zone System and choose whether you want to
display a Legend and whether the exposure Labels should be denoted as EV
steps, Luminosity values or turned o (None).
To toggle the visibility of the Exposure Zone tool on and o, tab at the bottom
right thumbnail.
To Next Page
Loading...
Need help?
General
