Troubleshooting
Maintenance, Cleaning & Troubleshooting
11-15
Information
Signals
If there is a connection failure within the IntelliVue Clinical Network, an
information signal will be generated. This information signal will be displayed
in the system message area on the Information Center where the affected
wireless patient monitoring device(s) (transceiver, access point, access point
controller, sync unit, or router) is assigned, as well as on all other Information
Centers connected to a common Database Server. The condition causing the
failure will be described in the Wireless Status Log, which is available in
Service Mode.
Information Signals
Information
Signal
Description What to Do
Wireless
monitoring loss -
Contact Service
Note—This
information signal
appears on ALL
Information Centers
connected to a
common Database
Server.
Problem with wireless
network infrastructure
device(s).
Contact Service.
Note—Details about the
communication disruption
are available in the
Wireless Status Log.
Router failure
Call Service
Note—This
information signal
appears on ALL
Information Centers
connected to a
common Database
Server.
A router used in the
wireless network has
failed.
Contact Service.
To Next Page
Loading...
Need help?
General
