Pairing Networked Devices
Pairing Monitoring Devices
10-3
Device
Revision
Pairing
Functionality
The level of pairing functionality available is dependent on the software
revision of the devices in use. Refer to the following table to identify available
functionality.
Pairing Networked Devices
Pairing at the
Information
Center
You can pair an IntelliVue Patient Monitor with the transceiver at the
Information Center. The telemetry data automatically displays as a permanent
overview session in the Telemetry Data Window on the IntelliVue Patient
Monitor. At the Information Center, the telemetry data and any patient
monitor data (e.g. NBP) are integrated in the patient sector.
See your IntelliVue Information Center Instructions for Use or IntelliVue
Patient Monitor Instructions for Use for information on how to pair/unpair
devices.
Functionality
Transceiver
Rev.
Patient
Monitor Rev.
Information
Center Rev.
Basic Pairing A.00 B.1 F.00
Pairing via Direct
Connection
B.00 E.00 J.00
Enhanced Pairing
via Direct
Connection
B.01 F.00 K.00
Pairing via Short-
Range Radio
Connection
C.00 G.00 L.00
To Next Page
Loading...