4 Time mode/auto cue button (TIME/A.CUE)
TIME:
Each time the button is pressed, the display’s time display
alternates between the currenttrack’s elapsed playing time,
and the remaining time (REMAIN).
A.CUE:
5 TRACK SEARCH ( , ) buttons
6 SEARCH ( , ) buttons
7 CUE button and indicator
Setting a cue point
Cue point sampler
Back-cue
Modifying a cue pint
8 Play/pause ( ) button and indicator
9 SCRATCH/JOG BREAK buttons and indicators
Use to select jog mode, including SCRATCH, JOG BREAK, or
OFF (neither indicator lighted).
10 BROWSE button
Use to select the BROWSE screen.
11 MIX button
Use to select the MIX screen.
12 EFFECT button
Use to select the EFFECT screen.
13 UTILITY button
Use to select the UTILITY screen.
14 Rotary selector dial
Rotate clockwise/counterclockwise for track selection and to
move cursor between setting items. Press to confirm
selection.
15 CUE/LOOP MEMORY button
Use to store cue points and loop points in memory.
Hold the button depressed to cancel a loop point.
16 CUE/LOOP CALL button
Use to call up cue and loop points stored in memory.
17 Function buttons (F1 to F6, from left)
Switching between the functions allocated to the six function
buttons can be performed by using the menu shown on the
center display.
On BROWSE screen:
“SELECT THE TRACK”
On MIX screen:
“MIX SCREEN”
On EFFECT screen
“[1] Scratch effect”
“[2] Jog break effect”
On UTILITY screen:
“USING MIDI FOR COMPUTER CONTROL”
“USING THE UTILITY”
18 LOAD A/B buttons
Sets the selected track in the controller A/B.
19 Select up ( ) button
Each time this button is pressed, the display returns to the next
higher menu level.
20 Select down ( ) button
Each time this button is pressed, the display advances to the
next lower menu level.
21 Center display
22 Display A/Display B
23 Jog dial (+FWD/–REV)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
