Piper Comanche PA-24 - FIGURE 6-20. TORQUE WRENCH AND ADAPTER INSTALLATION, (S;NS 24-4783; 24-4804 AND UP)

PIPER COMANCHE SERVICE MANUAL
ALIGN TORQUE WRENCH WITH CENTER
LINE OF RETRACTION TORQUE TUBE
__ ... CENTER OF GRIP AREA OR HANDLE
SOCKET --.1O.--II(
-,-
PIVOT POINT DEPENDING ON TYPE OF WRENCH
M."'~
O<'-OA'",,"'" TORQUE TUBE
"-: -¥'
/'
EFFECTIVE ADAPTER
LENGTH = 12 INCHES
NOSE GEAR
PUSH-PULL ROD
~~
MAIN GEAR PUSH-PULL CABLE
REVISED: 11/1/82
Figure &-20_ Torque Wrench and Adapter Installation
Serial Nos_ 24-4783. 24-4804 and up
lKl
LANDING GEAR AND BRAKE SYSTEM