EasyManua.ls Logo

Polaris Sportsman XP 1000 S 2021 - Engine; Cooling System

Polaris Sportsman XP 1000 S 2021
528 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.4
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
GENERAL INFORMATION - ENGINE
SPECIAL TOOLS
PART NUMBER TOOL DESCRIPTION
PA-49320
Crank / Mag Seal Installer
PA-49318-A
Crankshaft Holding Tool
PA-51880
Flywheel Bolt Tool
PA-49316-A
Flywheel Puller / Water Pump Drive Nut Puller
PS-48762
Fuel Pressure Gauge Adapter
2870975
Mity Vac® Pressure Test Tool
PU-50105 Oil Filter Wrench
PV-43570-3
Piston Ring Compressor Band
PV-43570-1
Piston Ring Compressor Pliers
PU-45543 Universal Driver Handle
PV-1253 or PV-4019 (Quick Release) Valve Spring Compressor
PV-43513-A
Valve Spring Compressor Adapter
PA-49378
Water Pump Bearing / Seal Installer
PA-44995-A
Water Pump Mechanical Seal Installer
Bosch Automotive Service Solutions 1-800-345–2233 or www.polaris.service-solutions.com
ENGINE LUBRICATION
SPECIFICATIONS
FLUID CAPACITY
Capacity:
Approximately 2 US quarts (1.9 L)
Recommended Oil Type:
Polaris PS-4 Synthetic 4-Cycle Engine Oil
Oil Filter Wrench:
PU-50105 or 2.5” (64 mm) equivalent
Oil Pressure Specification:
Using Polaris PS-4, Engine at operating temperature,
12–60 psi @ Idle RPM, 60–85 psi @ 7000 RPM
ENGINE / COOLING SYSTEM

Table of Contents

Related product manuals