Polaris Sportsman XP 1000 S 2021 - Water Pump Cover Assembly View

3.40
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
WATER PUMP COVER ASSEMBLY VIEW
WATER PUMP COVER ASSEMBLY VIEW
REF.
DESCRIPTION NOTES
q
Stator Cover
Apply corrosion resisting dielectric grease to
stator cover grommet.
Apply Moly Lube Grease to internal spline; all
spine teeth must be coated with grease prior
to assembly.
w
Coolant Fitting
Apply Loctite® 603 up to shoulder area before
insertion.
e
Water Pump Cover Gasket
r
Water Pump Seal
Install water pump seal until flush with stator
cover machined area. Use Water Pump Seal
Installer tool. See Special Tools page 3.4.
t
Water Pump Impeller
y
Washer
u
Water Pump Impeller Bolt 10 ft-lbs (14 N·m)
i
Water Pump Cover
o
Water Pump Cover Fasteners
89 in-lbs (10 N·m)
Torque in sequence shown.
ENGINE / COOLING SYSTEM