Polaris Sportsman XP 1000 S 2021 - Rear Bumper Cover; Rear Bumper Cover Installation; Rear Bumper Cover Removal

11
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
11.19
REAR BUMPER COVER
REAR BUMPER COVER REMOVAL
1. Remove the rear rack.
2. Disconnect the tail lights from the main wiring
harness.
3. Remove the tail lights.
4. Remove the (6) screws
q
retaining the rear bumper
cover.
REAR BUMPER COVER INSTALLATION
1. Align the rear bumper cover with the mounting holes
and loosely install the (6) screws
q
.
2. Torque all (6) screws to specification.
TORQUE
Rear Bumper Cover Screws
8 ft-lbs (11 N·m)
3. Install the tail lights.
4. Connect the tail lights to the main wiring harness.
5. Install the rear rack. See Rear Rack Installation page
11.15.
BODY / FRAME