Polaris Sportsman XP 1000 S 2021 - Rear Fog Light Bracket (International Zug Models); Rear Fog Light Bracket Removal; Installation

11
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
11.21
REAR FOG LIGHT BRACKET
(INTERNATIONAL ZUG MODELS)
REAR FOG LIGHT BRACKET REMOVAL /
INSTALLATION
1. Remove the two rear fog light screws
q
and remove
the rear fog light
w
from the rear fog light bracket.
2. Disconnect the rear fog light electrical connector from
the back of the rear fog light.
3. Remove the fasteners
e
retaining the rear fog light
bracket
r
to the left side of the license plate bracket.
4. Reverse this procedure to reinstall the rear fog light
bracket and rear fog light. Torque fasteners to
specification.
TORQUE
Rear Fog Light Bracket Fasteners
53 in-lbs (6 N·m)
TORQUE
Rear Fog Light Screws
Torque Until Fully Seated
BODY / FRAME