Polaris Sportsman XP 1000 S 2021 - Page 152

3.22
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
7. Remove 3 of the 4 bolts
a
retaining the intake
runners to the throttle body. Loosen the 4th bolt.
IMPORTANT
Do NOT attempt to remove the intake runners from the
intake plenum.
Do NOT attempt to remove the intake plenum from the
airbox.
8. Lift up on the airbox and rotate it towards the left side
of the vehicle. Open the wire harness retainer and
remove the harness. Set the airbox assembly aside.
9. Reverse the previous steps for installation. Torque
fasteners to specification.
TORQUE
Airbox Mounting Fasteners
8 ft-lbs (11 N·m)
ECU Bracket Mount Fasteners
Torque Until Fully Seated
ETC Housing Retaining Bolts
89 in-lbs (10 N·m)
ENGINE / COOLING SYSTEM