Polaris Sportsman XP 1000 S 2021 - Page 264

6.6
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
6. Remove the outlet duct.
7. Remove the left rear wheel from the vehicle.
8. Remove the (4) screws retaining the lower LH frame
support and remove from the frame.
9. Remove the (11) fasteners securing the outer PVT
cover to the inner PVT cover. Then remove the drive
belt. See Drive Belt Removal page 6.9.
10.With the drive belt removed, completely remove the
retaining bolt and driven clutch.
11. Install the Clutch Holder Wrench onto the drive clutch.
Clutch Holder Wrench
9314177-A
NOTICE
To remove the drive clutch retaining bolt, the
suspension needs to be loaded with the vehicle on the
ground.
12.Remove the drive clutch retaining bolt, washers, and
bushing by turning the bolt in a clockwise direction.
NOTICE
The drive clutch retaining bolt has left-hand threads.
Turn the bolt clockwise to remove it.
PVT SYSTEM