Polaris Sportsman XP 1000 S 2021 - Page 445

10
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
10.31
1. Disconnect the harness from the brake pressure
switch
q
.
2. Loosen and remove the brake pressure switch from
the distribution block
w
.
3. Install the new brake pressure switch and torque to
specification.
TORQUE
Brake Pressure Switch
180 in-lbs (20 N·m)
4. Proceed to Rear Brake System Bleeding
(International Models) page 10.23 to complete the
bleeding procedure.
BRAKE SYSTEM