Polycom Vortex EF2210 - AGCMIN - Set Minimum Allowed MIC;Line Input AGC Gain

Gain
This command sets the maximum gain that the AGC can apply on input channel 1 . For example, if
AGCMAX is set to 10, then the AGC for that channel can apply a maximum of 10 dB of gain to the
input signal.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information
on this type of command. The minimum and maximum values for this command are 0 and 15,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
Q01AGCMAX13
Set AGC maximum gain on input
channel 1 to 3 dB.
Q01AGCMAX13
Q01AGCMAX1?
Query the AGC maximum gain on
input channel 1 .
Q01AGCMAX1x where x is a number
between 0 and 15, depending on the
current setting of the AGC maximum gain on
input channel 1 .
8.6. AGCMIN -- Set Minimum Allowed Mic/Line Input AGC
Gain
This command sets the minimum gain that the AGC can apply on input channel 1 . For example, if
AGCMIN is set to -10, then the AGC for that channel can apply a minimum of -10 dB of gain to the
input signal.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information
on this type of command. The minimum and maximum values for this command are -15 and 0,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
Q01AGCMIN1-3
Set AGC minimum gain on input
channel 1 to -3 dB.
Q01AGCMIN1-3
Q01AGCMIN1?
Query the AGC minimum gain on
input channel 1 .
Q01AGCMIN1x where x is a number
between -15 and 0, depending on the
current setting of the AGC minimum gain
on input channel 1 .