8.74. MUTEGIL -- Set Mute Status of Line Inputs as a
Group
This command sets the mute status of all the line inputs simultaneously. This is different from using a
wildcard, * with the
MUTEI command because that command sets all the mic and line inputs
together, while the MUTEGIL sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is a boolean command. See
Section 6.1 for more information on this type of
command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
Q01MUTEGIL1
Mute all line inputs.
Q01MUTEIA1
Q01MUTEIB1
Q01MUTEGIL2
Toggle mute status of all line inputs.
Q01MUTEIAa
Q01MUTEIBb,
where a and b reflect the mute status (0 or
1) of each of the line inputs. If this
command was issued after the example
above, then the status messages would be:
Q01MUTEIA0
Q01MUTEIB0.
Q01MUTEGIL?
Query the mute status of all the line
inputs.
Q01MUTEIAa
Q01MUTEIBb,
where a and b reflect the mute status (0 or
1) of each of the line inputs. If this
command was issued after the example
above, then the status messages would be:
Q01MUTEIA0
Q01MUTEIB0.
8.75. MUTEI -- Mute One or More Inputs
This command sets or queries the mute status of the analog inputs (1, A, B) .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
To Next Page
Loading...
