EasyManuals Logo

Polycom Vortex EF2210 User Manual

Polycom Vortex EF2210
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
This command sets or queries the enabled state of the microphone gain stages on the microphone
input. Enabling the gain stage adds an extra 33 dB of gain in the input signal path. See the
description of the
GAINI command for information on how the MIC and GAINI commands relate to
nominal input levels.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
Q01MIC11
Enable microphone gain stage for input
channel 1.
Q01MIC11
Q01MIC10
Disable microphone gain stage for input
channel 1.
Q01MIC10
Q01MIC12
Toggle microphone gain stage for input
channel 1.
Q01MIC1x, where x is 0 or 1 depending
on the current enabled state of the
microphone gain stage on input channel
1.
Q01MIC1?
Query enabled status of microphone gain
stage for input channel 1.
Q01MIC1x, where x is 0 or 1 depending
on the current enabled state of the
microphone gain stage on input channel
1.
8.71. MINI -- Enable Modem Initialization String
This command controls whether or not the modem initialization string is sent at power-up. If MINI is
0, then the modem initialization string is not sent. If MINI is 1, then the modem initialization string is
sent. The text of the modem initialization string is set via the
MINISTR command.
This command is a boolean command. See
Section 6.1 for more information on this type of
command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example Description Status Message
Q01MINI1
Enable modem initialization string.
Q01MINI1
Q01MINI0
Disable modem initialization string.
Q01MINI0

Table of Contents

Other manuals for Polycom Vortex EF2210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom Vortex EF2210 and is the answer not in the manual?

Polycom Vortex EF2210 Specifications

General IconGeneral
BrandPolycom
ModelVortex EF2210
CategoryTelephone Accessories
LanguageEnglish

Related product manuals