Power Electronics SD300 Series User Manual

POWER ELECTRONICS
SD300
DESCRIPTION OF PROGRAMMING PARAMETERS
107
Screen
Description
Default
value
Range
Function
Set
on
RUN
Frq
[1]
Speed
reference 1
0 = Local
0 to 12
Select the source for the speed reference.
OPT.
DESCR.
FUNCTION
0
LOCAL
Reference will be given by
keypad and will be set in
dr.1.
2
V1
Reference will be
introduced through the
voltage analog input 1.
4
V2
Reference will be
introduced through the
voltage analog input 2.
5
I2
Reference will be
introduced through the
current analog input 2.
6
MODBUS
The reference will be
introduced through
Modbus.
8
COMMS
The reference will be
introduced through the
communications.
9
PLC
The common area can be
linked with user sequence
output and can be used as
command.
12
PULSE
Reference will be
introduced through the
Pulse input.
NO
[1] Displayed when an LCD keypad is in use.

Power Electronics SD300 Series Specifications

General

Brand	Power Electronics
Model	SD300 Series
Category	Inverter
Language	English