Power Electronics SD300 Series - Page 233

POWER ELECTRONICS
SD300
MODBUS COMMUNICATION
231
Monitoring Parameters
NOTE: These are read-only parameters.
Modbus Address
Parameter
Scale
Units
Values
Decimal
Hexadecimal
40768
0h0300
Drive model
-
-
SD300: 006h
40769
0h0301
Rated power
-
-
0.75kW: 3200h
1.5 kW: 4015h
2.2 kW: 4022h
3.7 kW: 4037h
5.5 kW: 4055h
7.5 kW: 4075h
11 kW: 40B0h
15 kW: 40F0h
18.5 kW: 4125h
22 kW: 4160h
40770
0h0302
Input voltage
-
-
220VAC: 0221h
400VAC: 0431h
40771
0h0303
SW Version
-
-
(Ex) 0x0100: Version 1.0 (Ex)
0x0101: Version 1.1
40773
0h0305
Drive operation state
-
-
Bit 0 – 3:
0: Stopped
1: Operating in forward
direction
2: Operating in reverse
direction
3: DC operating (0 speed
control)
Bit 4 – 7
1: Speed searching
2: Accelerating
3: Operating at constant rate
4: Decelerating
5: Decelerating to stop
6: H/W OCS
7: S/W OCS
8: Dwell operation
Bit 12 – 15
0: Normal state
4: A warning has occurred
8: A fault has occurred. Drive
will operate according to the
setting of Pr.30.