PowerFleet
®
VAC4 and VAC4S Hardware User’s Guide
INTRODUCTION
This Guide provides the information needed to configure, use, and maintain the hardware included with PowerFleet’s
Enterprise Vehicle Management System (VMS):
Vehicle Asset Communicator
* WAM not required for Wi-Fi deployments.
In addition to this guide, PowerFleet offers many other ways to learn the system including but not limited to:
• Live training webinars
• Interactive self-paced learning modules
• How-to videos
• Technician Certification programs (visit http://go.powerfleet.com/powerfleet-university)
Related Documents
This detailed Guide is a supplement to the following PowerFleet system documents:
PowerFleet Enterprise Getting Started Guide
General system instructions for the site coordinator.
PowerFleet Enterprise Installation Guide
Installation instructions for vehicle hardware.
(Cellular) Wireless Asset Manager Installation Guide
Installation instructions for the WAM.
Associate each operator with assigned fob
Note: The VAC is an interactive mini-computer designed for installation on industrial vehicles. Since vehicle designs vary
widely, this Guide cannot provide precise instructions for each specific vehicle model. Instead, this Guide provides the
basic knowledge needed for a certified installer with a typical installation.
Note: The installation, configuration and operational procedures provided in this document are intended for use by
authorized, certified personnel only. It is the responsibility of the supervisor to ensure that the procedures in this
publication are only completed by trained/certified personnel, using the proper equipment and following the proper
safety protocols.
To Next Page
Loading...
