PowerFleet VAC4 - Section 7: VAC Troubleshooting; VAC screen and LEDs do not illuminate

PowerFleet
®
VAC4 and VAC4S Hardware User’s Guide
085-00000700 Rev K
support@powerfleet.com
Page 70 of 103
Interpreting Error Codes
The example below illustrates how to interpret a VAC error message on the screen when logged in as a Maintenance
operator.
The VAC screen message is displayed as follows: 00-Error Msg > 24 Hours (Refer to Hardware Guide)
00
-
Error Msg > 24 Hours
Refer to Hardware Guide
↑
↑
↑
Error number
Error cause
Where to go for error resolution
Error Codes
00-Error Msg > 24Hrs (Refer to Hardware Guide)
[FUNCTIONAL] Appears after a reference error has been present on a vehicle for greater than 24 hours
Possible Cause(s)
Action
Reference error was not
cleared by a Maintenance
operator within 24 hours
of the error creation.
• Log in to the VAC as a Maintenance operator and review/ address each error
message that is displayed.
• To view the errors, select the “ERRORS” menu option and scroll up/ down.