PowerMax 500 Bearclaw - Disassembly, Inspection and Assembly of Steering Vertical Column; Hexagon Flange Bolt M8×30

To Next Page

To Previous Page

4.1.1Disassembly, inspection and assembly of Steering

Vertical Column

4.1.1.1Disassembly of Steering Vertical Column

1. Remove all of the Plastic cover and Plastic

ornaments on Steering Bar (Figure 4-1-1

1）. Front Mud Shield

2）.Plastic Ornament

3）.Rear Mud Shield

2. Remove Steering Bar Holder

(Figure 4-1-2)

Figure 4-1-1

1）. Hexagon Flange Bolt M8×30

2）.Steering bar Holder

3）.Steering bar Clip

3. Unplug all cables and connecting

Wires and remove the Steering Bar

(Figure 4-1-3) Figure 4-1-2)

1）Connecting Wire

2）Rear Brake Cable

3）Front Brake Cable

4）Steering Bar