1. Detach Rear Disk Brake Pump from the Frame
(Figure 4-2-6)
2. Remove Rear Disk Brake oil bowl from the Frame
(Figure 4-2-9)
3. Release assembling
Bolt（M8*14） and
Detach the Rear Disk
Brake Clip. (Figure 4-2-12)
Figure 4-2-12
1) Rear Disk Brake Clip
2) Hexagon flange bolt M18×14
4、Remove Rear Disk Brake System
4.2.2.4. Disassembly of Rear Disk Brake Plate
1. Remove rear wheel components (Figure 4-2-13)
2、Release the transmission
Case components of Rear Bridge
From the main frame. Remove
Rear central transmission shafts
Components. (Figure 4-2-14)
Figure 4-2-13
1) Conical Nuts M10
2) Wheel Hub
3、Remove the Bottom Seat
To Next Page
Loading...