profile depth. Insufficient tire pressure can result in not
only intensified wearing of the tire but also instability
during the course of operating the vehicle (such as hard
turning). Excessive tire pressure can also reduce the friction
force between the tire and ground, causing spinning or lose of
control. Therefore, please ensure the tire pressure strictly
complies with figures shown in the chart above.
Before operating the vehicle each time, please check if
profile depth of the tire is over worn, which might result in
spinning, instability, lose of control and other potential
security risk of the vehicle.
Caution: Should the profile depth falls below 3mm,
please replace the tire immediately. (Figure
4-2-18)
Figure 4-2-18
Figure 4-2-18)
4.4 Transmission System
4.4.1 Fore Bridge
To Next Page