Caution: Do NOT operate the vehicle immediately
after assembling the brake system. Please
apply the Brake Lever several times to
fully engage the Disk Brake Plate and have
the Brake Fluid circulating before riding
the vehicle.
4.3 Wheel and Tire
4.3.1：Preparation for maintenance of wheel:
1. Inspect wear condition
Of the tire.
(Figure 4-2-16)
2. Check if the Wheel
Hub is worn-out or
Damaged. (Figure 4-2-13)
3. Check if the Wheel Hub
Is rusted or cracked. Figure 4-2-16
4、Check if the conical
Nuts of the Wheel Hub
Are loosened or distorted.
4.3.2 Disassembly, inspection and assembly of wheel
components:
To Next Page
Loading...