4.6.5. Inspection and Maintenance of rear Suspension
1. Inspection and Maintenance are similar to the fore
Suspension
2. Check whether the assemble shaft of the rear damper is
deformed in which case it must be changed.
3. Check the Collar Sheath and Rubber Sheath
4. Check if the cotter pin on the assembly shaft of the rear
damper is reliable.
Caution:
Disassemble rear damper and check if the damper and
the connecting hole is bent or cracked. In case of above
defects, call for professional staff or replace the
damper and then tighten the bolt (Note: self-lock nut
is necessary and the torque must be at a range of 45～
55 N.m)
5. Electrical system
Route color indication
1. Black┄┄Ｂ 18.Blue White┄┄L/W
2. Red┄┄Ｒ 19.Blue Black┄┄L/B
To Next Page
Loading...