13、stopper elastic ring for shaft 14、middle spacer sleeve for security 15、
hexagon flange bolt M10×40 16、hex locknut
17、elastic cushion 18、hexagon flange bolt M10×65 19、hex locknut M10×1.25
20、fore L/R damper 21、hexagon flange bolt M10×50 22、hex locknut M10×1.25
23、cover of fore bottom-left rocker arm 24、cover of fore bottom-right rocker arm 25、
hexagon flange bolt M6×12 26、holding plate nutM6
4.6.4 Disassembly, Maintenance and Assembly of
up-and-down rocker arm 1、Disassembly and Maintenance
Collar Sheath, cotter pin and damper may easily occur problem.
A、If the L/R rocker arms swing easily, we can test it from the
following aspects: whether the collar sheath is defective
by pressure and whether the Rubber Sheath is worn out or
cracked
B、Check whether the cotter pins is reliable. If not so, replace
it.
C、The main problems and homologous maintenance are as following:
check whether the spring is split or the oil will spill out
in which case the damper muse be replaced and test if the
oil bowl is excellent without damage in different
circumstances.
2、Disassembly (as the following picture)
Mount for L/R damper, up-and-down rocker arm assembly onto
the frame with Hexagon Flange Bolt M10×65 (8pcs), M10 nuts
(8pcs), Hexagon Flange Bolt M10×50 (4pcs) and M10locknuts
To Next Page
Loading...