562400-000, Issue 1.3 January 2022
Page 12 of 61
5.3. User Login
PME may be configured to work with a built-in user list. If so, the system will prompt for a user
login pass code after acknowledging the Confirm Safety Features screen. Select the user name
required and the login code screen will appear.
Using the arrow buttons enter a valid pass code. The previous pass code digits will be replaced
with a star as the code is entered. Press the GREEN TICK button to confirm the login pass code.
If a valid pass code is entered the system will commence normal operation.
If an incorrect login code is entered, a failure screen will be displayed. Press the GREEN TICK
button to return to the Select User screen.
Logging out is described in section 5.5.
Increases highlighted
digit
Decreases highlighted
digit
value
change
Moves highlighter to
right
Moves highlighter UP
Select highlighted
name to open the
Enter Login Code
screen below
Moves highlighter
DOWN
Exit Login
To Next Page
Loading...