PROLEC James Fisher PME400 User Manual

562400-000, Issue 1.3 January 2022
Page 17 of 61
7.1. Height Limit
7.1.1. Height Limit Menu
A height limit can be set by entering a known height on the keypad or by
manually moving the machine to the desired limit.
Using the height Limits Menu, the height limit can be
switched ON and OFF. A “Confirm Operation” screen will be
displayed, see sections 7.1.2 to enter a known height and
section 7.1.3 for setting the limit by moving the machine.
With a height limit set, the screen will normally display the current highest point value. To display the
current limit value, exit to the full screen and hold any button for three seconds, the value will then turn
blue indicating it is the current limit value.
Exit to previous
menu
Set height limit using
current highest part of
equipment
Enter a value
Current height limit and highest point.
Only displayed if a height limit is set.
Turns Monitoring
ON
and OFF

PROLEC James Fisher PME400 Specifications

General

Brand	PROLEC
Model	James Fisher PME400
Category	Controller
Language	English