562400-000, Issue 1.3 January 2022
Page 7 of 61
4. Operating, and Hazard Situation, Recommendations
Operating Recommendations
When using envelope monitoring:
When setting height or slew restrictions,
make sure any implement/tool attached is
in its least favourable position
Check for correct operation once the
restriction has been set
Reduce operating speed
Do not move the equipment quickly when
close to a restriction
Do not operate the machine in a reckless
manner
Do not travel with a restriction set
Reset the slew restriction if the machine is
Hazard Situation Recommendations
In a limit hazard state:
Return the control levers to neutral once a
limit has been reached, if appropriate
Operate the machine at a slow speed
Do not travel
To Next Page
Loading...