562400-000, Issue 1.3 January 2022
Page 2 of 61
This guide describes operation of the
PROLEC PME ENVELOPE SAFETY SYSTEM FOR CONSTRUCTION PLANT
Model covered :
PME400
PME400 - MEC SYSTEM
Prolec supports a nationwide dealer network. Warranty claims, service work, technical information and
spare parts are available by contacting :
James Fisher Prolec Ltd
25 Benson Road
Nuffield Industrial Estate
Telephone +44 (0) 1202 441000
E-mail service@prolec.co.uk
THIS ENVELOPE SAFETY SYSTEM IS NOT SUITABLE FOR USE IN EXPLOSIVE ATMOSPHERES.
ADJUSTMENT BY UNAUTHORISED PERSONS WILL INVALIDATE ANY WARRANTY OR
CERTIFICATION SUPPLIED. IF A PROBLEM ARISES WHICH CANNOT BE RECTIFIED USING THIS
GUIDE, AUTHORISED SERVICE SHOULD BE SOUGHT.
THIS DEVICE IS CERTIFIED TO MEET CURRENT UK & EC SAFETY REGULATIONS FOR LIFTING
OPERATIONS.
Any alterations or modifications to machine components which affect this system and any system
component failure must be reported to Prolec Ltd or via the machine convertor/service agreement holder.
This manual must be kept with the product and be passed on to any subsequent user of the product.
Whilst every effort has been made to ensure the accuracy of the information supplied in this manual,
Prolec Ltd cannot be held responsible for any errors or omissions.
This system records data on the machine’s operation.
Manufacturers original instructions.
To Next Page
Loading...
Need help?
General