Promise Technology Pegasus2 R2+ User Manual

SSD reaDer PoD
Insert an SSD drive into the slot and use
the PROMISE Utility to format the drives.
Then follow instructions in “Partition” on
page 37 to format the drive.
To insert the SSD, orient the drive right
side up, and make sure power and SATA
contacts are on the edge being inserted
into the slot. Then slide into the slot
until the it clicks into position indicating
it is properly seated in the Media Pod
container.
SSD Reader Pod (empty)
Empty SSD Reader Pod inserted into Pegasus2 R2+
9
Promise Technology

Promise Technology Pegasus2 R2+ Specifications

General

Brand	Promise Technology
Model	Pegasus2 R2+
Category	Storage
Language	English